Further infusion of mainhull panels

I closed the tubes and turned off the vacuum pump on Sunday evening. This afternoon it was still a good vacuum in the bag. I mixed up the epoxy and went on with the infusion.


Approximately two minutes after opening the inlet:



Then I accidentally kicked the epoxy bucket down on the floor, rapidly closed the inlet and mixed up some more epoxy to continue the process. This is 19 mins after start:

Here is a close up of the incorporated glue flange along the cockpit floor mid line:

It is currently curing in the bag. Hope i will be able to detach the panel from the table top (I used plenty of "Nor-slipp")