Wednesday, February 16, 2011

Almost prepared

Preparing for infusion of the lower leading edge half.  I have decided placement of halyard out, rope clutches and horn cleats. Carbon, peel ply and release film have been cut.  Foam is cut with recesses for the hardware.

Halyard out mould inserts.  Mould sealer and two layers of release wax have been applied

Release film, peel ply and carbon ready to go in the mould after another two layers of wax.

Some nice French hardware arrived.  Karver KF1 for the screacher.  Identical furler for the jib.

No comments: